Creating A Stable Business

« Back to Home

What's Wrong With My Water Heater?

Posted on

Water heaters are indeed important appliances, but most homeowners take them for granted. Unless you go on a vacation, you are bound to use your water heater on a daily basis. Just like all other appliances, water heaters break down from time to time, and in such situations, they need to be repaired. Most times, the damage is minimal, but other times it can be significant, and it is in those times that you need to call for professional help. Here are some of the most common water heater problems you might run into:

Water Leakage from the Top

You can check for a leak in the top part of your electric water heater. If the hot outlet or the cold inlet pipes are loose, if the T&P valve is failing, or if the inlet valve is leaking, then it could be a problem. All these are easy plumbing problems to fix.

No Hot Water

Electric heaters usually have two heating elements, and when there is no hot water, it could mean that the circuit breaker has been tripped. Check that out at the breaker box. If that is not the problem, it could be that the elements have failed and need replacing. It could also be a problem with the limit/reset switch at the thermostat. It could have tripped due to water being too hot, or it might need to be replaced.

Not Enough Hot Water

More often than not, this is an issue with the thermostat. It might actually be as simple as adjusting the temperature on your thermostat. Unlike gas water heaters, electric water heater thermostats are not designed to be changed. However, sometimes it may be necessary to do so, especially in the colder months when water gets cold while passing through the plumbing system.

Too Hot Water

This might also be caused by the thermostat. Try to adjust it accordingly. If you are not able to lower it enough, you may have to replace your thermostat.

Water Takes Longer Than Usual to Reheat

Electric water heaters normally take longer to reheat water compared to gas heaters, but if it takes even longer than usual, the problem may be with the heating elements. If you are using more water than you did when installing the heater, you may need to install a new model that will handle the amount of water you use.

The Water Quality Is Poor

If you are dealing with smelly hot water, it may be caused by bacteria in your tank, especially if you use well water. A tank cleaning will probably eliminate this problem. If you are dealing with rust-colored water, it is usually a sign of corrosion of the tank or the anode rod. This could affect your plumbing system, so ensure you have the tank treated before the problem becomes serious.

Another thing to keep in mind is that water softeners are a great idea for home use; they can improve the quality of water by removing hard minerals, which will extend your plumbing appliances' lifespans and make you healthier. In short, only a heating and plumbing professional can tell you the best fix for your water heater. To learn more, talk to companies like American Water Treatment.